Major/Minor alarms on servers through WEB interface

[Yerbol]

Всем привет. С наступающим всех. Скажите плиз после того как подключил CNC control network C (PN-4 моем случае) появилась такая ошибка через web interface.

Как его решить это? А да скажу еще, когда сделал CNC то использовал только одну ISPI карту.

а когда смотришь через АSA нет вообще никаких error or alarms.



Status Summary


The Status Summary Web page displays information about the status and the overall health of the server.
Top of Form
SERVER STATUS

Cluster ID: 001
Duplication: sw
Standby Busied? no
Standby Refreshed? yes
Standby Shadowing: on
Duplication Link: up
Active RAID HDD Status: 2
Elapsed Time since Init/Interchange: 489d 22:25:34

District2 Disrtict1

ID: 002 (2) ID: 001 (1)
Mode: Active Mode: Standby
Major Alarms: yes Major Alarms: no
Minor Alarms: yes Minor Alarms: yes
Control Network: 4 / 4 / 4 Control Network: 3 / 3 / 4
Processor Ethernet: unused Processor Ethernet: unused
PE Priority: PE Priority:
Server Hardware: okay Server Hardware: okay
Processes: okay Processes: okay
RAID HDD Status: 2
Refresh page every seconds

Help
Bottom of Form


IP SERVER INTERFACE INFORMATION

Port Pri/ Primary/ Primary/ Primary/ State Of
Ntwk Sec Secondary Secondary Secondary Serv Control Health
Num Bd Loc IP Address Host Name DHCP ID State State C P E G
---- ------ --------------- ---------------- --------- ----- ------- -------
1. 1A01 199.172.254.1 199.172.254.1 ipsi-A01a IN actv-aa 0.0.0.0
1B01 199.172.255.1 199.172.255.1 ipsi-A01b IN standby 0.0.0.0
2. 2A01 199.172.254.2 199.172.254.2 ipsi-A02a IN actv-aa 0.0.0.0
2B01 199.172.255.2 199.172.255.2 ipsi-A02b IN standby 0.0.0.0
3. 3A01 199.172.254.3 199.172.254.3 ipsi-A03a IN actv-aa 0.0.0.0
3B01 199.172.255.3 199.172.255.3 ipsi-A03b IN standby 0.0.0.0
4 4A01 10.189.2.67 10.189.2.67 ipsi-A04a IN actv-aa 0.0.0.0

[gosha]

Standby видит не все IPSI - копайте сеть.

[Yerbol]

как я понял это же и причина почему одни сервак не видить IPSI? я прав?

Это как раз standby server.

View IPSI Version Results

This may take 1 seconds ...
IPaddress IPSI Name IPSIBoard HW# FW#

10.191.240.200 ipsi-A04a Not available.
199.172.255.3 ipsi-A03b TN2312BP 15 30
199.172.254.3 ipsi-A03a TN2312BP 15 30
199.172.255.2 ipsi-A02b TN2312BP 15 30
199.172.254.2 ipsi-A02a TN2312BP 15 30
199.172.255.1 ipsi-A01b TN2312BP 12 12
199.172.254.1 ipsi-A01a TN2312BP 15 30


А второй server active видеть карту IPSI.

View IPSI Version Results

This may take 1 seconds ...
IPaddress IPSI Name IPSIBoard HW# FW#

10.191.240.200 ipsi-A04a TN2312BP 15 30
199.172.255.3 ipsi-A03b TN2312BP 15 30
199.172.254.3 ipsi-A03a TN2312BP 15 30
199.172.255.2 ipsi-A02b TN2312BP 15 30
199.172.254.2 ipsi-A02a TN2312BP 15 30
199.172.255.1 ipsi-A01b TN2312BP 12 12
199.172.254.1 ipsi-A01a TN2312BP 15 30

А когда заходишь через общий Ip-address тоже все ок:

View IPSI Version Results

This may take 1 seconds ...
IPaddress IPSI Name IPSIBoard HW# FW#

10.191.240.200 ipsi-A04a TN2312BP 15 30
199.172.255.3 ipsi-A03b TN2312BP 15 30
199.172.254.3 ipsi-A03a TN2312BP 15 30
199.172.255.2 ipsi-A02b TN2312BP 15 30
199.172.254.2 ipsi-A02a TN2312BP 15 30
199.172.255.1 ipsi-A01b TN2312BP 12 12
199.172.254.1 ipsi-A01a TN2312BP 15 30

[gosha]

Явно проблема с сетевыми настройками на standby